Ultra 210 LCD arm

UL210-P2-KUF-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 2 inch pole. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications

Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
2 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm

*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-DU1-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a desk.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
Desk/Table/Counter
360 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-DU5-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a desk and is raised 5 inches off the desk with a riser tube..

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

UL210-DU1-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a desk.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
Desk/Table/Counter
360 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-DU3-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a desk and is raised 3 inches off the desk with a riser tube..

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
Desk/Table/Counter
360 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-DU5-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a desk and is raised 5 inches off the desk with a riser tube..

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
Desk/Table/Counter
360 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-P2-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 1.75 inch pole.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
2 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-P2-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 2 inch pole.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
2 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-P17-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 1.5 inch pole.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
1.75 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-P17-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 2 inch pole.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
1.75 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-DU3-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a desk and is raised 3 inches off the desk with a riser tube..

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

UL210-T19-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 19 inch wall track. Wall track supplied by ICW.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
14.5 inches
20 inches
Wall
5.5 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-T36-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 36 inch wall track. Wall track supplied by ICW.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
31.5 inches
20 inches
Wall
5.5 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-W3-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a wall. Optional Toggler Kit is available for mounting to metal wall studs.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
Wall
4.5 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-W3-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a wall.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
Wall
4.5 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-T19-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 19 inch wall track. Wall track supplied by ICW.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
14.5 inches
20 inches
Wall
5.5 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-P15-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 1.5 inch pole.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
1.5 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-T36-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 36 inch wall track. Wall track supplied by ICW.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
31.5 inches
20 inches
Wall
5.5 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL280-P2-TB

Product Name

Model Description
The Ultra 280 LCD arm allows the full articulation of the LCD monitor. Unlike the Ultra 210 system, on the Ultra 280 the monitor hangs under the arms. The 280 folds up right under the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 280 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 280 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 2 inch pole.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
2 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL280-P17-TB

Product Name

Model Description
The Ultra 280 LCD arm allows the full articulation of the LCD monitor. Unlike the Ultra 210 system, on the Ultra 280 the monitor hangs under the arms. The 280 folds up right under the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 280 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 280 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 1.75 inch pole.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
1.75 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL280-P15-TB

Product Name

Model Description
The Ultra 280 LCD arm allows the full articulation of the LCD monitor. Unlike the Ultra 210 system, on the Ultra 280 the monitor hangs under the arms. The 280 folds up right under the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 280 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 280 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 1.5 inch pole.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
1.5 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL280-P2-QG

Product Name

Model Description
The Ultra 280 LCD arm allows the full articulation of the LCD monitor. Unlike the Ultra 210 system, on the Ultra 280 the monitor hangs under the arms. The 280 folds up right under the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 280 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 280 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 2 inch pole.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
2 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL280-P17-QG

Product Name

Model Description
The Ultra 280 LCD arm allows the full articulation of the LCD monitor. Unlike the Ultra 210 system, on the Ultra 280 the monitor hangs under the arms. The 280 folds up right under the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 280 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 280 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 1.75 inch pole.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
1.75 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL280-P15-QG

Product Name

Model Description
The Ultra 280 LCD arm allows the full articulation of the LCD monitor. Unlike the Ultra 210 system, on the Ultra 280 the monitor hangs under the arms. The 280 folds up right under the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 280 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 280 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 1.5 inch pole.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
1.5 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL280-T19-TB

Product Name

Model Description
The Ultra 280 LCD arm allows the full articulation of the LCD monitor. Unlike the Ultra 210 system, on the Ultra 280 the monitor hangs under the arms. The 280 folds up right under the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 280 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 280 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 19 inch wall track. Wall track supplied by ICW.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

UL280-T36-TB

Product Name

Model Description
The Ultra 280 LCD arm allows the full articulation of the LCD monitor. Unlike the Ultra 210 system, on the Ultra 280 the monitor hangs under the arms. The 280 folds up right under the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 280 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 280 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 36 inch wall track. Wall track supplied by ICW.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
31.5 inches
20 inches
Wall
5.5 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL280-T19-QG

Product Name

Model Description
The Ultra 280 LCD arm allows the full articulation of the LCD monitor. Unlike the Ultra 210 system, on the Ultra 280 the monitor hangs under the arms. The 280 folds up right under the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 280 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 280 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 19 inch wall track. Wall track supplied by ICW.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
14.5 inches
20 inches
Wall
5.5 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL280-T36-QG

Product Name

Model Description
The Ultra 280 LCD arm allows the full articulation of the LCD monitor. Unlike the Ultra 210 system, on the Ultra 280 the monitor hangs under the arms. The 280 folds up right under the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 280 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 280 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 36 inch wall track. Wall track supplied by ICW.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
31.5 inches
20 inches
Wall
5.5 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL280-W3-TB

Product Name

Model Description
The Ultra 280 LCD arm allows the full articulation of the LCD monitor. Unlike the Ultra 210 system, on the Ultra 280 the monitor hangs under the arms. The 280 folds up right under the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 280 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 280 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a wall. Optional Toggler Kit is available for mounting to metal wall studs.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
Wall
4.5 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL280-W3-QG

Product Name

Model Description
The Ultra 280 LCD arm allows the full articulation of the LCD monitor. Unlike the Ultra 210 system, on the Ultra 280 the monitor hangs under the arms. The 280 folds up right under the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 280 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 280 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a wall. Optional Toggler Kit is available for mounting to metal wall studs.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
Wall
4.5 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-P15-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 1.75 inch pole.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications

Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
1.5 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-DU5-KUB-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a desk and is raised 5 inches off the desk with a riser tube.. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
Desk/Table/Counter
360 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-DU3-KUB-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a desk and is raised 3 inches off the desk with a riser tube.. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
Desk/Table/Counter
360 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-DU5-KUB-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a desk and is raised 5 inches off the desk with a riser tube.. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
Desk/Table/Counter
360 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-P2-KUB-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 2 inch pole. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
2 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-DU1-KUB-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a desk. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
Desk/Table/Counter
360 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-P2-KUB-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 1.75 inch pole. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powdercoated gray
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
2 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-DU3-KUB-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a desk and is raised 3 inches off the desk with a riser tube.. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
Desk/Table/Counter
360 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-P17-KUB-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 1.5 inch pole. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
1.75 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-T19-KUB-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 19 inch wall track. Wall track supplied by ICW. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
14.5 inches
20 inches
19 in wide x 10 in deep
Wall
8.5 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-DU1-KUB-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a desk. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated black for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
Desk/Table/Counter
360 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-P15-KUB-TB

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 1.75 inch pole. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated black
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
1.5 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-W3-KUB-QG

Product Name

This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Minimum profile:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
Wall
8.125 inches*
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-P15-KUB-QG

Product Name

Model Description
The Ultra 210 LCD arm allows the full articulation of the LCD monitor. The 210 folds up right over the mount and extends 20" from the center of the mount to the LCD monitor. The Ultra 210 has two articulating 11 inch arms. Two handles next to the monitor tighten the monitor into position. The monitor can be adjusted vertically on two stainless steel rails with 4 inches of vertical adjustment. The 210 has been widely used in Medical and Dental applications as data entry stations and for patient use.

This model is designed to be mounted to a 1.5 inch pole. This model also includes a keyboard tray. The tray is 19 inches wide and 10 inches deep and has a mouse tray that can be pulled out on either side. The tray is designed with and ergonomic wrist rest and can be folded up when not in use.

Machined out of billet aluminum, this system is then powder coated gray for a durable, lasting finish. Hand assembly ensures quality product is shipped to you.

Made in the USA.

Specifications
Finish:
Weight capacity:
Vert. adjustment range:
Horiz. adjustment range:
Keyboard tray size:
Mounting surface:
Arm swivel at mount:
Screen swivel:
Screen tilt:
VESA interface: Powder coated gray
18 lbs (8.16 kg)
6 inches
20 inches
19 in wide x 10 in deep
1.5 inch pole
180 degrees*
360 degrees*
180 degrees*
75mm and 100mm
*Maximum range. Range will vary
depending on the position of the arm
and the size of the monitor.

UL210-T36-KUB-QG

Product Name

Colors

Mounts

Orientation